Most first orders of pink salt go wrong in the same place: the specification. “Pink salt, fine, 25 kg bags” describes a dozen different products. Here is how experienced buyers write it — and why each line matters.
1. Grain size: specify millimetres, not adjectives
Salt is crushed and then screened through sieves. The grade is defined by the openings it passes through and the openings it does not. Always state a range in millimetres (or mesh) and an allowed tolerance — typically no more than 5–10 % outside the range.
| Grade | Particle size | Typical use |
|---|---|---|
| Powder / extra fine | 0.1 – 0.5 mm | Shakers, seasoning blends, food processing |
| Fine | 0.5 – 1 mm | Table salt, kitchen packs |
| Medium | 1 – 2 mm | Brining, pickling, food service |
| Coarse | 2 – 5 mm | Grinder jars, finishing salt |
| Granules | 5 – 10 mm | Bath salts, spa use |
| Chunks | 1 – 8 cm | Bath, décor, further processing |
If you are filling grinders, ask for the dust (fines) to be removed: dust clogs the burrs and looks poor through a clear jar. If you are blending seasonings, ask for a narrow range so the salt does not separate from the other ingredients in the pack.
2. Colour: name the seam, then approve a sample
Colour comes from trace minerals, chiefly iron, and changes from seam to seam: white, light pink, dark pink to red, and greyish. Because colour is natural it cannot be “matched” by processing — it has to be bought from the right seam. Approve a physical sample, keep half of it, and write “colour as approved sample ref. ___” into the contract.
3. Purity and analysis
Food-grade pink salt typically tests at 98.0–99.3 % sodium chloride on a dry basis, with calcium, potassium and magnesium making up most of the remainder. Ask for a certificate of analysis per lot that shows at least NaCl, moisture, water-insoluble matter and heavy metals against Codex STAN 150 (the Codex standard for food-grade salt).
- NaCl (dry basis) — typically ≥ 98 %
- Moisture — ≤ 0.2 % for free-flowing fine grades
- Water-insoluble matter — ≤ 0.5 %
- Lead, arsenic, cadmium, mercury — within Codex limits
4. Iodisation and anti-caking
Pink salt is sold un-iodised by default. Several markets require or favour iodised table salt; if yours does, specify the iodine level (usually as potassium iodate, in ppm). Free-flowing agents are not needed for coarse grades; for extra-fine grades in humid markets, discuss low-moisture packing first before adding anything to the salt.
5. Packaging and loading
Bulk edible salt usually ships in 25 kg woven polypropylene bags with a PE liner, or in one-tonne jumbo bags. A 20-foot container takes roughly 24–26 tonnes — but check the road-weight rules at destination before you plan a full load. Decorative items (lamps, blocks, tiles) are heavy too, and fragile: insist on edge protection and individual boxing.
A one-line specification that works: “Himalayan pink salt, food grade, light pink, 0.5–1.0 mm (max 5 % outside), NaCl ≥ 98 % dry basis, moisture ≤ 0.2 %, un-iodised, packed 25 kg PP/PE bags, COA per lot.”
See our Himalayan pink salt specifications for the full range, or use the container calculator to plan a load.